You must be logged in to access these downloads.
|Download Worx Plugin Suite
Includes the following: ANNOWorx, ISOWorx, BUBBLEWorx, MTOWorx,
|Download ELECTROWorx 2016||188.8.131.52|
After downloading, proceed to the next step.
|Right-click on the Setup file and select “Run as Administrator”. Do this even if you are a local administrator.
Finish the installation.
Note: You may need your IT department to install as admin.
|If you are installing ELECTROWorx, or a Worx Catalog, you will need a serial number to finish installation. Get your serial from email@example.com|
Proceed to the next step.
Note: You need an active internet connection to start licensing your Worx Products.
Find your Worx e-license before starting these steps. These were provided when you purchased your Worx software. If you cannot find your e-license, send an email to firstname.lastname@example.org.
Go to your start menu, and type in “ECE License Manager” without the quotes.
Start “ECE License Manager”.
Enter in the email address of the Registered User. Serial numbers are tied to a registered users email address, anyone else’s email address will not work.
Enter in the serial numbers for the products you want to activate, and select “Activate All”.
|Verify your software was licensed successfully. Click on the software on the top row, and review the license information. If you want to deactivate this license and activate on another computer, you can do so here.
If you are having difficulty activating your license, send an email to email@example.com.
Worx Plugins – Open CADWorx and look for the Worx Plugins Ribbon. Don’t see the Ribbon? In AutoCAD/BricsCAD, type in “NETLOAD” without the quotes.
Go to C:\Program Files\ECE Design\(AutoCAD or BricsCAD)\. Open RIBBONWorx.dll. Now the Ribbon will be shown.
note: NETLOAD only has to be done once.
|Having Trouble? If you cannot start your software, send an email to firstname.lastname@example.org.|
To learn to use your software, navigate to www.ecedesign.com.
Click on Support > Manuals.